科研成果
1、发表论文
名称 |
作者 |
期刊 |
年卷 |
类型 |
基于权重置信度的组合赋权法在工程选材中的应用 |
陈奎,张天云 |
机械工程材料 |
2017,41(4):11-14 |
CSCD |
Variation and Grey GM(1,1) Prediction of Melting Peak Temperature of Polypropylene during Ultraviolet Radiation Aging |
CHEN K,ZHANG T Y,ZHANG Z R, |
IOP Conf. Series: Materials Science and Engineering, |
2017,281:225-229 |
EI |
Quantitative relationship between melting peak temperature and carbonyl index of polypropylene during UV aging based on date fitting |
Tianyun Zhang, Kui Chen, Zhengrong Zhang and Rui Shi |
IOP Conf. Series: Materials Science and Engineering |
2018,322: 94-98 |
EI |
Injection Molding Process Optimization of Polypropylene using Orthogonal Experiment Method Based on Tensile Strength |
Tianyun Zhang,Kui Chen,Guangqiao Liu and Xiaoping Zheng, |
IOP Conference Series: Materials Science and Engineering, |
2019,612:1416-1420 |
EI |
Quantitative Structure Activity Relationship Analysis of Polypropylene During Ultraviolet Aging Based on Tensile Strength |
Kui Chen, Tianyun Zhang |
Journal of Physics: Conference Series |
2019 |
国际会议 |
Microstructure, mechanical and tribological property of multi-components synergistic self-lubricating NiCoCrAl matrix composite |
Silong Caoa,b , Jiansong Zhoua,∗ , Lingqian Wanga,∗∗, Youjun Yu , |
Tribology International |
131(2019): 508-519 |
SCI |
Inflfluence of composition and microstructure on the tribological property of SPS sintered MCrAlY alloys at elevated temperatures. |
Silong Cao , Shufang Ren , Jiansong Zhou **, Youjun Yu * |
Journal of Alloys and Compounds |
2018(740):790-800. |
SCI |
Effect of copper molybdate on the lubricating properties of NiCrAlY laser clad coating at elevated temperatures |
Benbin Xin , Youjun Yu ,⁎ |
Surface & Coatings Technology . |
313(2017):328-336 |
SCI |
Electronic and optical properties of the wurtzite-ZnO/CH3NH3PbI3, interface:first-principles calculations. |
Si F J, Hu W, Tang F L. |
J Mater Sci, |
2017,52(24): 13841-13851. |
SCI |
Electronic properties and lattice configurations of Au/CH3NH3PbI3 interface. |
Si F J, Hu W, Tang F L, |
Mod Phys Lett B, |
2017, 31(18): 1750199. |
SCI |
Electronic properties of NiO (1 1 0)/CH3NH3PbI3 (1 0 0) interface from the first-principles calculations. |
Si F J, Tang F L, Xue H T |
Chem Phys Lett, . |
2018,707:133-139 |
SCI |
Electronic and optical properties of CH3NH3Pb1-xAgxI3 from the first-principles calculations. |
Si F J, Tang F L, Xue H T, et al. |
J Renew Sustain Ener, |
2018,10:033504. |
SCI |
ZnO nanowire arrays decorated with PtO nanowires for efficient solar water splitting[J]. |
ShurongFu,abHongyanHu,*Chenchen Feng, Yajun Zhanga and Yingpu Bi * |
Catalysis Science & Technology, |
2018,8, 2789–2793 |
SCI |
Epitaxial growth of ZnWO4 hole-storage nanolayers on ZnO photoanodes for effiffifficient solar water splitting |
Shurong Fu, Beibei Zhang,Hongyan Hu,*Yajun Zhangaand Yingpu Bi |
J. Mater. Chem. A, |
2019,7, 2513–2517 |
SCI |
碾压形变热处理对纯镍N6焊缝组织与性能的影响 |
柴廷玺,王希靖,王博士, |
稀有金属 |
2017,41(07):768-774. |
EI |
Corrosion Resistance and Electrical Conductivity of Nickel Alloy N6 Plasma Arc Welded Joints |
Wang Xijing, Chai Tingxi,Liu Xiao, |
RareMetal Materials and Engineering, |
2016,45(2): 426-430 |
SCI |
纯镍材N6及其焊缝在3种腐蚀介质中的腐蚀 |
柴廷玺,王希靖. |
材料保护 |
2018,51(12):46-48 |
CSCD |
保护气流量对纯镍等离子弧焊接头微观组织的影响 |
王希靖,赵青山,柴廷玺 |
焊接学报 |
,2016,37(10):29-32 |
EI |
The Role of Mechanical Connection during Friction Stir Keyholeless Spot Welding Joints of Dissimilar Materials |
XiaoLiu,XijingWang,BoshiWang,LiangliangZhang,ChaoYang,Tingxi Chai. |
Metals |
2017,7(6). |
SCI |
纯镍及焊缝的耐蚀性分析 |
柴廷玺,王希靖,魏 |
材料保护, |
2016,49(11):91-94 |
CSCD |
AZ31B镁合金/镀锌钢无匙孔搅拌摩擦点焊结合方式 |
刘骁,王希靖,景文霞,柴廷玺 |
焊接学报, |
2016,37(08):17-20 |
EI |
镍合金N6等离子弧焊接接头耐蚀性及导电性的分析 |
王希靖,柴廷玺,刘骁 |
稀有金属材料与工程 |
,2016,45(02):426-430. |
SCI |
Evolution of Grain Structure and Texture for 6082-T6 Aluminum Alloy during Friction Stir Welding |
张亮亮, 王希靖, |
Journal of Wuhan University of Technology, |
2019, 34(02):143-149. |
SCI |
Microstructure Evolution and Properties of Friction Stir Welding Joint for 6082-T6 Aluminum Alloy |
Liangliang Z , Xijing W |
Materials Research |
2018, 21(6). |
SCI |
6082-T6铝合金搅拌摩擦过程中动态再结晶方式对焊核区织构类型的影响 |
张亮亮, 王希靖, 刘骁. |
材料导报 |
2019, 033(004):665-669 |
EI |
6082铝合金搅拌摩擦焊焊接过程中晶粒取向演化 |
张亮亮, 王希靖, 刘骁 |
材料工程 |
2018, 046(010):55-59. |
EI |
旋转速度对6082-T6铝合金搅拌摩擦焊焊接接头织构的影响 |
张亮亮,王希靖,魏学玲,刘骁,柴廷玺. |
焊接学报 |
,2019,40(3):128-132. |
EI |
基于DEFORM-3D的FSW温度场及流场数值模拟 |
张亮亮,王希靖,李德福 |
兰州理工大学学报 |
2019, 45(6):6-11. |
中文核心 |
Effect of Different Welding Processes on Electrochemical and Corrosion Behavior of Pure Nickel in 1 M NaCl Solution |
XijingW,Boshi W ,Liangliang Z , |
Metals, |
2017,7(12):532-544 |
SCI |
6082-T6铝合金搅拌摩擦焊组织演变与力学性能 |
王希靖, 魏学玲, 张亮亮 |
焊接学报, |
2018,39(03):4-8. |
EI |
焊后时效处理对6082-T6铝合金搅拌摩擦焊接头的影响 |
王希靖, 魏学玲, 张亮亮. |
材料导报, |
2017,31(4):62-66 |
EI |
搅拌头形状对2024铝合金接头组织及性能的影响 |
王希靖, 马晓飞, 张亮亮. |
焊接学报, |
2017,38(12):99-104. |
EI |
Mechanical properties and microstructure of pure nickel PAW and PAW-TIG welded joints |
王希靖, 王博士, 张亮亮, |
China Welding, |
2017(4),37-48 |
中文核心 |
镁-钢无匙孔搅拌摩擦点焊接头机械连接状态分析 |
刘骁, 王希靖, 车文斌, 张亮亮, |
材料与冶金学报, |
2017,16(3):225-232 |
核心期刊 |
镁钢无匙孔搅拌摩擦点焊工艺参数对接头扩散程度的影响 |
王希靖, 车文斌, |
焊接学报, . |
2018(8):6-10 |
EI |
Effect of WC/Co content on the microstructure and properties of NiCrBSi composite coatings fabricated by supersonic plasma spraying,Journal of Alloys and Compounds |
Hongjian Guo ,*, Bo Li d, Cheng Lu , Qi Zhou , Junhong Jia |
Journal of Alloys and Compounds |
2019(789) 15 :966-975 |
SCI |
Comparison of microstructures and properties of VN and VN/Ag composite films fabricated by pulsed laser deposition |
HongjianGuo· ChengLu·Zhenyu Zhang·BunvLiang· Junhong Jia |
Applied Physics A Materials Science & Processing |
(2018)124:694 |
SCI |
Microstructures and tribologicalproperties of TiN/MoS2/Ag film prepared by pulsed laser deposition technique |
Hongjian Guo, Bo Li, MinminHan,WenyuanChen,ZhenyuZhang, and Junhong Jia |
Journal of Material Engineering and Performance |
2018)(27):3869–3876 |
SCI |
退火温度对铸态Al-Mg-Mn-Zr-Er合金组织及性能的影响 |
国洪建,张振宇,李博,梁补女. |
材料热处理学报, |
2018,39(03):30-36. |
CSCD |
脉冲激光沉积VN/Ag复合薄膜的组织及摩擦学性能研究 |
国洪建,贾均红,张振宇,梁补女, |
材料导报 |
2017,31(02):55-59. |
EI |
Microstructure and properties of VN/Ag composite films with various silver content |
Hongjian Guo, Minmin Han, Wenyuan Chen |
Vacuum |
Vacuum137 (2017)97-103 |
SCI |
CoMoCrSi coatings prepared by high velocity oxygen fuel spraying:Microstructure and mechanical properties at elevated temperatures up to 800 ℃ |
Hongjian Guo, Yijing Wang , Enkang Hao |
Materials Resarch Express |
2020.1 |
SCI |
Mechanical, Tribological, and Oxidation Resistance Properties of NiCrAlY Coating by Atmospheric Plasma Spraying |
Bo Li *, Shengqiang Ma1, Yimin Gao1 , Cong Li 1 , Hongjian Guo |
Frontierin Materials |
08 May 2019 |
SCI |
Effect of heat treatment on the microstructure, mechanical property and tribological property of plasma-sprayed high temperature lubricating composite coating from nanostructured powder. |
Bo Li a, * , Yimin Gao a , Cong Li a, **, Zhiwei Liu a , Hongjian Guo |
Journal of Alloys and Compounds, |
2019.10 |
SCI |
Effect of substrate temperatures on the properties of PLD Mo–V–Ag–O nanocomposite thin films. |
ChengLua,b,YingyingFua,JunhongJiaa,c,∗,Gewen Yia , ErqingXiea ,Hongjian Guo |
Vacuum |
2019.1 |
SCI |
TC4合金微弧氧化膜的摩擦磨损性能及其失效机理研究 |
刘百幸,彭振军,梁军* |
摩擦学学报 |
2019,39(1):50~56. |
EI |
Effect of atomic oxygen irradiation on the structural and tribological characteristics of polytetrafluoroethylene and its composites |
Wang xiangli*, Liu Baixing* |
Surfaceand Interface Analysis, |
2017,49,112~116. |
SCI |
钛合金表面高硬度微弧氧化膜的 制备和耐磨性研究, |
齐玉明,彭振军,刘百幸,梁军* |
表面技术 |
2019,48(7):81~88 |
EI |
Influence of silicate concentration in electrolyte on the growth and performance of plasma electrolytic oxidation coatings prepared on low carbon steel |
Wenbin Yang, Zhenjun Peng, Baixing Liu, Weimin Liu, and Jun Liang* |
Journal of materials engineering and performance, |
2018, 27: 2345–2353 |
SCI |
A protocol for fast electroless Ni-P on Al alloy at medium-low temperature accelerated by hierarchically structured Cu immersion layer |
Ruixue Kang, Zhenjun Peng, Baixing Liu, Daoai Wang, Jun Liang* |
Surface & coatings technology, |
2017, 309: 67–74 |
SCI |
Characterization of plasma electrolytic oxidation coating on low carbon steel prepared from silicate electrolyte with Al nanoparticles |
Wenbin Yang, Weimin Liu, Zhenjun Peng, Baixing Liu, Jun Liang*, |
Ceramics international, |
2017, 43: 16851-16858 |
SCI |
A comparative study of characterisation of plasma electrolytic oxidation coatings on carbon steel prepared from aluminate and silicate electrolytes |
Wenbin Yang, Qingbiao Li, Cancan Liu, Jun Liang*, Zhenjun Peng and Baixing Liu, |
Surface Engineering, |
2018, 34: 54-62 |
SCI |
Characterization and properties of plasmaelectrolytic oxidation coating on low carbon steel fabricated from aluminate electrolyte |
Wenbin Yang, Qingbiao Li, Weimin Liu, Jun Liang*, |
Vacuum, |
2017, 144: 207-216 |
SCI |
Titanium plate supported MoS2 nanosheet arrays for supercapacitor application |
Lina Wanga,b, Ying Maa,b, Min Yanga, Yanxing Qi a,∗ |
Applied Surface Science |
396 (2017) 1466–1471 |
SCI |
Supercapacitor Performances of the MoS 2 /CoS 2 Nanotube Arrays in Situ Grown on Ti Plate |
Wang L , Zhang X , Ma Y , |
Journal of Physical Chemistry C |
2017, 121(17) |
SCI |
2、科研项目
下达单位及具体类别 |
项目名称 |
主要负责人 |
时间 |
江苏汇博机器人技术股份有限公司教育部产学合作协同育人项目 |
兰州城市学院工业机器人实践基地建设项目(汇博) |
同长虹 |
2018-2019 |
教育部产学合作协同育人项目 |
智能制造机器人工程专业师资培训项目(汇博) |
刘绍舫、同长虹 |
2018-2019 |
教育部产学合作协同育人项目 |
智能制造机器人工程专业师资培训项目(巨林) |
同长虹 |
2017-2019 |
陇原青年创新人才扶持计划 |
面向工业管道环境特种功能机器人技术创新研究 |
王振禄、张九娥、董丽梅、同长虹 |
2020-2023 |
甘肃省高等学校科研项目 |
管道检测机器人自适应运动机理与运动可靠性研究 |
王振禄、张九娥、同长虹 |
2019.7-2021.12 |
甘肃省教育厅 |
籽瓜挖瓤机、籽瓤分离机产品再优化及其产业化研究,30万元 |
同长虹 |
2018.5-2019-12 |
横向项目 |
微波、红外与热风联合干燥设备的研制20万元 |
同长虹 |
2017-2020 |
兰州市科技局 |
土壤膨胀性能检测试验装置产业化研发20万元 |
同长虹 |
2018-2019 |
甘肃省教育厅 |
新工科背景下卓越工程师能力提升平台项目,50万元 |
同长虹 |
2018-2020 |
横向项目 |
N类车厢改进设计项目,5万元 |
同长虹 |
2018-2020 |
横向项目 |
省七建脚手架力学计算项目,6万元 |
同长虹 |
2018-2019 |
甘肃省教育厅 |
碳纤维刹车材料制备技术创新团队,50万元 |
陈翔,同长虹 |
2018-2020 |
横向项目 |
汽车装配VR教学课件校企合作项目,60万元 |
同长虹 |
2019-2021 |
甘肃省科技厅,2018年甘肃省自然科学基金资助项目(编号18JR3RA223) |
类石墨烯二硫化钼成核剂对聚丁二酸丁二醇酯结晶行为影响研究(5万元) |
陈奎 |
2018.7~2020.6 |
横向课题(LZCU-KJ/2019-001) |
用于大批量试样的恒温干燥箱的研制,10万元 |
陈奎 |
2019.3~2019.7 |
甘肃省教育厅,2019年甘肃省高等学校创新能力提升项目(编号2019B-176) |
基于数据驱动建模的聚丙烯紫外老化机理研究 |
陈奎 |
2019.7-2021.6 |
兰州城市学院博士科研启动基金 |
超重元素的原子结构及性能研究,20万元 |
俞友军 |
2019.12-2022.11 |
兰州城市学院博士科研启动基金 |
ZnO基纳米复合材料的可控合成及其光电性能研究,5万元 |
符淑瑢 |
2019.12-2022.11 |
兰州城市学院青年教师科研资助项目 |
含非金属夹杂物Al2O3 的纯镍 N6 焊接接头动态拉伸过程中的断裂行为研究,1万元 |
柴廷玺 |
2019.1-2020.12 |
兰州城市学院博士科研启动基金 |
钢质管道环焊缝表面粉末等离子堆焊关键技术研究,5万元 |
柴廷玺 |
2019.1-2021.12 |
兰州城市学院博士科研启动基金 |
Cf表面Cu、Ni金属覆层及Cf/Cu(Ni)复合材料的制备与表征,5万元 |
安亮 |
2019.1-2021.12 |
兰州城市学院博士科研启动基金 |
钛合金基耐磨自润滑微弧氧化膜的可控制备及其摩擦学行为研究,20万元 |
刘百幸 |
2019.12 -2022.11 |
国家自然科学基金项目51405472 |
空间用铝合金基自适应润滑材料的制备及其摩擦学行为研究 |
刘百幸 |
2015/01-2017/12 |
兰州城市学院博士科研启动基金 |
钼系纳米材料的设计合成及其超级电容性能研究,5万元 |
王丽娜 |
2019.5-2022 . 4 |
兰州城市学院青年基金 |
三维异质网络MoS2基超级电容器用电极材料的设计合成及其性能研究,3万元 |
王丽娜 |
2020.1-2021.12 |
兰州城市学院博士科研启动基金 |
搅拌摩擦焊过程中晶粒取向演变规律研究 |
张亮亮 |
2019.12 2022.11 |
兰州城市学院博士科研启动基金 |
钙钛矿太阳能电池界面处的光电性能研究 |
司凤娟 |
2019.12 2022.11 |
中国博士后基金会,中国博士后基金面上项目(2019M663851) |
海洋环境下Co基宽温域润滑复合涂层的研发8万 |
国洪建 |
2019-2021 |
中科院“西部之光”人才计划“青年学者”(A类) |
新型NiAl基高温润滑复合涂层的构筑、结构及性能研究18万 |
国洪建 |
2019-2021 |
甘肃科技厅,甘肃省重大专项计划项目 |
镍产业链关键技术开发与产业化1000万 |
刘致远 参与 |
2017-2020 |
3、科研获奖
获奖项目名称 |
奖励名称 |
获奖时间 |
获奖 等级 |
奖励部门 |
第一 获奖人 |
籽瓜挖瓤机项目 |
科学技术奖 |
2019 |
一等 |
甘肃省机械工程学会 |
同长虹、黄晓鹏、孟刚 |
抗植物磨料磨损技术的研究与应用 |
科学技术奖 |
2015 |
一等 |
甘肃省机械工程学会 |
吴劲锋、黄晓鹏、同长虹 |
籽瓜挖瓤机的研制 |
科学技术奖 |
2017 |
二等 |
甘肃省机械工程学会 |
同长虹 |
集自动收费等多功能的智能快递存取柜设计 |
科学技术三等奖, |
2017 |
三等 |
甘肃省电工技术学会 |
石蕊、同长虹 |
第二届中国创新挑战赛(兰州),难题解决方案 |
难题解决方案对接“成功奖” |
2018 |
|
兰州市科技局 |
同长虹 |
TMD吸振原理及其参数优化 |
优秀论文二等奖 |
|
二等 |
甘肃省焊接学会 |
同长虹 |
超硬透明复合薄膜的制备、计算模拟和应用 |
甘肃省技术发明奖 |
2018 |
三等 |
甘肃省人民政府 |
陈奎1/6 |
超润滑碳基薄膜纳米结构可控构筑及摩擦学性能研究 |
甘肃省高等学校科研优秀成果 |
2017 |
三等 |
甘肃省教育厅 |
陈奎2/6 |
镍合金板带自动拼焊设备开发及焊接工艺研究 |
甘肃省科技进步奖 |
2017.1 |
二等 |
甘肃省人民政府 |
王希靖(第1),柴廷玺(第5) |
新型宽温域润滑复合涂层的研发与应用 |
2019年度甘肃省科技进步 |
2020.1 |
三等 |
甘肃省人民政府 |
国洪建 (第1) |
镍及镍合金带材焊接装备性能和工艺开发及应用 |
中国有色金属工业科学技术奖 |
2017,12 |
三等 |
中国有色金属工业协会,中国有色金属学会 |
王希靖 |
氧化铈在镍钴钨合金粉末成形及高温耐磨涂层中作用机理研究及应用 |
2019年度甘肃省科技进步奖 |
2020.1 |
三等 |
甘肃省人民政府 |
国洪建 (第5) |
烟气轮机导流支撑板铸造工艺攻关 |
全国24省4市铸造学会最佳论文奖 |
2017.7 |
|
全国24省4市铸造学术会议组委会 |
刘致远 |
4、授权专利
1 陈奎. 一种电动搅拌器: 中国, 201721470255.X[P]. 2017-11-7 2018.08
2 陈奎. 一种新型冷凝管: 中国, 201721470301.6[P]. 2017-11-7 2018.05
3 陈奎. 一种恒温干燥箱: 中国, 201721471500.9[P]. 2018-11-7 2018.05
4 陈奎. 一种电加热套: 中国, 201721470979.4[P]. 2017-11-7 2018.08
5 陈奎. 一种带有过滤机构的磁力搅拌器: 中国, 201821080278.4[P]. 2018-7-9 2019.02
6 陈奎. 一种化学合成用高效蒸馏装置:中国, 201921080278.4[P]. 2018-7-10 2019.02
7 陈奎, 张天云, 刘广桥, 董丽梅, 陈建宏, 郑小平. 一种聚丁二酸丁二醇酯/类石墨烯二硫化钼纳米复合材料的制备方法: 中国, 201711029100.7[P]. 2017-10-29
8柴廷玺,一种可调节式焊接支座,CZL201821095239.1, 2019.2
9 柴廷玺,一种便于调节角度的智能焊接机,ZL201821095232.X, 2019.2
|